​

EPESOL offers series M and RL auxiliary contactors for low voltage control applications. Operating at Ith of 16 and 20 A and 690Vac/440Vdc max. offered contactors complied to more than 15 standard including IEC/EN-60947-5-1.

​

EPESOL offers PRC series plug-in relays by GE for low voltage control applications. Relays offered are both AC/DC operated with lockable test button with mechanical flag indicator. Form factor of 35mm rail (EN50022) mounting with LED indicator and is available in 1-4P CO 8-11 pin.

​

EPESOL offers Dilos loadbreak disconnectors by GE ranging from 16A up to 4000A both in DIN-rail and wall mounted configurations. Approved by KEMA, CEBEC and CE. Available in 2, 3 or 4 poles and 3P+N/F with peak short withstand circuit current to be 105 kA.

​

EPESOL offers main and emergency stop switches of series ML and photovoltaic applications by GE. Products are complied with IEC/EN-60947-3 and many other.

​

Modern ergonomic P9 and 077 series  actuators are available in a wide variety of colours and styles, and are the result of superior industrial design experience. Series P9 and 077 satisfy any sophisticated industrial applications with form factor of 22 and 30mm.

​

EPESOL offers series NMV and D single and multivoltage relays, electronic timers and limit switches by GE. Available in 22.5 and 45 mm module with direct supply voltage of 24-240V AC/DC. Limit switches are available in both metal and thermoplastic three pole options.

​

EPESOL offers motor protection circuit breakers for the protection of AC/DC motors conformity to standards IEC 947-2 & IEC 947-4-7. Available in manual push button operation with setting ranges from 0.1 to 25A at 690Vac and 220Vdc along with short circuit capacity 65kA.

​

EPESOL offers Series 105 signalling units, used to indicate the electric equipment power supply conditions. Type approved by CE, UL, CSA and CEI, IEC, VDE, BSI and UTE standards. Protected by IP40 and IP65 and operated at max. 690Vac.

​

EPESOL offers low voltage capacitor units by ABB. CLMD. CLMD03 and QCap and QCap-L are offered in this category that consist of heavy-duty enclosure. Also dry type capacitor with low losses and long lifetime are offered as part of Qcap and QCap-L.

​

EPESOL offers APCQ, ABBACUS, APFC and LMCB contactor switched low voltage capacitor banks by ABB. Compact range, easy to install and use with the RVC controller, the APCQ comes with a modular design available with detuning reactors.

​

EPESOL offers Dynacomp thyristor-switched low voltage capacitor bank by ABB. having a modular, compact and standardized design. It is available in single/three phase models equipped with detuning reactors for optimal protection against harmonics.

​

The low-voltage stepless power compensator, PQC-STATCON is suitable for low- and medium-voltage networks with step-up transformer. It offers a touch screen interface. There is no risk of harmonic amplification. Best for instantaneous and stepless compensation

​

EPESOL offers PQFI-PQFM-PQFS active harmonic filters by ABB. They allow filtering efficiency with closed loop 3/4 wire control system & individual harmonic selection capability. It performs stepless reactive power compensation of both inductive and capacitive loads.

​

EPESOL offers Fulos fused loadbreak disconnectors by GE ranging from 125A up to 1000/1250A both in wall mounted configurations. Approved by KEMA and CE. Available in 3,4 or 6 poles and 3/3+N.

​

Classic - Analogue time switches by GE available in NET SYNCHRONIZED - day/week programmable, QUARTZ SYNCHRONISED - day/week programmable and QUARTZ SYNCHRONISED - day-day/day-week programmable

​

Galax - Digital time switches by GE. Available in QUARTZ SYNCHRONIZED - ASTRO/day/week/year programmable along with DCF-77 antenna and programming tools and operating at 220240 V.